filter
-
Brand
- By Category
- Direction
- Date Range
88Events
Pictures
Events
Editorial EXCLUSIVE: Father and son duo jailed after brags of stashing over ?500,000 in floorboards and walls
- 2023-12-23
- 1
Editorial EXCLUSIVE: Father and son duo jailed after brags of stashing over ?500,000 in floorboards and walls
- 2023-12-07
- 1
Editorial EXCLUSIVE: Father and son duo jailed after brags of stashing over ?500,000 in floorboards and walls
- 2023-04-11
- 8
Editorial NY: Most Valuable Kobe Bryant jersey auctioned at Sotheby's - Preview
- 2023-02-02
- 2
Editorial Model of a 30-Pounder Gun on Deck, Model of a 30-pound cannon on a horse on a ship part. The wooden barrel, 55 cm long and with a 32 mm caliber, is painted black, it has a visor on the waistband, the grape is flat from behind and has a refraction ring....
- 2022-12-24
- 1
Editorial Model of a Masting Sheer, Model of a mast crane, lifting a mast, on a floorboard. The legs lean forward and are held back by two braces and four stays attached to bollards. The foot in which the braces are positioned is adjustable in two positions. Beh...
- 2022-07-21
- 1
Editorial Model of a Masting Sheer, Model of a mast crane, lifting a mast, on a floorboard. The legs lean forward and are held back by two braces and four stays attached to bollards. The foot in which the braces are positioned is adjustable in three positions. B...
- 2022-07-21
- 1
Editorial Road legal antique buses, Hong Kong, China - 2021
- 2021-09-07
- 1
Editorial Migrants in Mexico Shelter, Matamoros - 26 Jan 2019
- 2021-09-07
- 1
Editorial Model of a Bread Oven, Model of a mechanical baking oven on a floorboard. It is a box-shaped construction that can be dismantled in two halves to show the inside. In the middle of the long front is a fire with an underground ashtray. Inside, the hot ga...
- 2020-12-04
- 1
Editorial Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen on the mirror and gilt carving on the bow. The model has a flat deck, it has a ramsteven, round stern, rudder wit...
- 2020-12-04
- 1
Editorial Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ramsteven, a sharp cruiser fence, a rudder with a rounded blade, two two-leaf ...
- 2020-12-04
- 1
Editorial Model of an Ironclad Monitor, Polychromed and witnessed block model of a monitor, the floorboard missing. The model has a vertical bow that rises above the deck, a sharp cruiser fence, rudder with rounded blade, steering wheel on the campaign deck, two...
- 2020-01-15
- 1
Editorial Model of a Section of an Armored Turret, Half model of a fourteen-sided turret, on a floorboard. The outer shell consists of vertical segments, representing armor plates, with a firing hole at a three-quarter height that widens inwards. The inner wall ...
- 2020-01-15
- 1
Editorial Model of a Pump Windlass, Model of a roasting spindle on a floorboard. The octagonal drum, suspended between two cheeks that form the roasting spindle with two servants each, is also equipped with small drums outside the cheeks. The roasting spindle is...
- 2020-01-15
- 1
Editorial Model of a Figurehead, Model of a figurehead on figurehead, on a floorboard. The figure is a standing man in seventeenth-century clothing, his right arm raised, the left one on his sword, the object he holds in his right hand is missing, as is his swor...
- 2020-01-15
- 1
Editorial Model of a Carronade on a Slide, Model of a carronade on sliding carriage on a floorboard representing a part of a ship's deck. The carronade has a caliber of 21 (16.6) mm and is 29 cm long. The barrel has a closing elevation with a visor, a visor on t...
- 2020-01-15
- 1
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. The pin of the crank falls into a hollow bush in the eye of the crank of the wheel shaft, which can be unscrewed and removed...
- 2020-01-15
- 1
Editorial Model of the Paddle Gear of the Lock at Flushing, Model of a winch for operating the sluices of lock gates, on a floorboard. The winch stands on four legs. With a crank on either side, a gear is driven inside, so that a rack with round pins is moved up...
- 2020-01-15
- 1
Editorial Model of a 30-Pounder Gun on Deck, Model of a 30-pound cannon on a horse on a ship part. The wooden barrel, 55 cm long and with a 32 mm caliber, is painted black, it has a visor on the waistband, the grape is flat from behind and has a refraction ring....
- 2020-01-15
- 1
Editorial Model of an Oscillating Steam Engine with Adjustable Steam Valve, Moving sketch model on floorboard. The model, which is driven with a crank, shows the following components: cross section of an oscillating cylinder with piston, which drives a crankshaf...
- 2020-01-15
- 1
Editorial Model of a Gunboat, Construction model of the hull of a flat-bottomed smooth gunboat on a floorboard, the skin under the bar wood has been left out for the most part. Round fore ship with two gun ports, around aft ship. Four gun ports in sides. The shi...
- 2020-01-15
- 1
Editorial Model of a cross-section through an armored turret Model or Half a Gun Turret, Polychromed model of half a turret dome on complete turning circle, on floorboard. The turning circle has twenty-four rollers and a rack on the outside, the tower rotates wi...
- 2020-01-15
- 1
Editorial Model of a Bread Oven, Model of a mechanical baking oven on a floorboard. It is a box-shaped construction that can be dismantled in two halves to show the inside. In the middle of the long front is a fire with an underground ashtray. Inside, the hot ga...
- 2020-01-15
- 1
Editorial Model of a Figurehead, Model of a figurehead on figurehead, on a floorboard, incomplete. The figure is a standing woman in Roman clothes, her right arm raised (the hand is missing), with a peacock at her feet. The skeg and the floorboard are decorated ...
- 2020-01-15
- 1
Editorial Model of a Spoon Dredger, Model of a spoon dredger on a floorboard, in very poor condition and incomplete. The center ship has six winches on a raised deck, all of which are operated by hand and whose cables are attached to one spoon at each end, so th...
- 2020-01-15
- 1
Editorial Model of a Gunboat, Polychromed block model on a floorboard. It is a very streamlined and slender ship, with an S-frame that sticks deeper and deeper towards the stern. Sharp canoe-like bow, sharp cruiser fence, rudder with rounded rudder blade, a thre...
- 2020-01-15
- 1
Editorial Model of a Windlass, Model of a roasting spindle on a floorboard. The drum, suspended between two cheeks, has eight continuous holes for wind booms: the roasting spindle can also be operated with a single wind boom on the starboard cheek, which engages...
- 2020-01-15
- 1
Editorial Model of a Windlass, Model of a roasting spindle on a floorboard. The drum, suspended between two cheeks, has no holes for wind booms: the roasting spindle is operated with a single wind boom on the starboard cheek, which engages a gear wheel with a pa...
- 2020-01-15
- 1
Editorial Model of a Figurehead, Model of a figurehead on a sheet, on a floorboard, incomplete. The figure is a crowned, running man in classical clothing, holding a spear in his hands, the spear has broken off at both ends. A monster fish under his feet. Scheg ...
- 2020-01-15
- 1
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. Crankshaft and wheelshaft are connected by a connecting piece, a so-called tug or turntable, which allows some impurity in t...
- 2020-01-15
- 1
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. The pin of the crank falls into a slot of a head on the crank of the wheel shaft which, when turned to the correct position,...
- 2020-01-15
- 1
Editorial Model of an Installation for Tarring Rope Yarn, Model of a device for tying cable yarns on a floorboard. The working of the model remains unclear. On one side a tar reservoir is suggested with two holes through which a rope can run. In the other half a...
- 2020-01-15
- 1
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. Crankshaft and wheelshaft are connected by a connecting piece, a so-called tug or turntable, which allows some impurity in t...
- 2020-01-15
- 1
Editorial Model of a Hydraulic Press, Model of a simple hydraulic press on a wooden floorboard. On the one hand is a manually operated pump, equipped with a pump arm, regulator, overflow and safety valve. The pump arm can be set in two positions. The regulator i...
- 2020-01-15
- 1
Editorial Model of a Lifeboat Release, Polychromed model of a part of a ship's wall with a sloop on two nail avits, on a floorboard on which water is simulated, incomplete. The model demonstrates the sloop trap of the sloop, releasing two hooks on the hoist of t...
- 2020-01-15
- 1
Editorial Model of the Stern of an 84-Gun Ship of the Line, Waterline model of the stern of a line ship of 84 pieces. Waterline model of the external appearance of a stern on a floorboard in which waves are carved in relief. Round stern with two-storey wulf and ...
- 2020-01-15
- 1
Editorial Half Model of the Stern of a Screw Steamer, Model of a half stern of a screw steamship. Model of half a aft ship (port) with screw sleeve, on a floorboard. Elliptical fence, three decks indicated. Soetermeer's cross bond, the skin has been omitted. The...
- 2020-01-15
- 1
Editorial Model of a Masting Sheer, Model of a mast crane, lifting a mast, on a floorboard. The legs lean forward and are held back by two braces and four stays attached to bollards. The foot in which the braces are positioned is adjustable in two positions. Beh...
- 2020-01-15
- 2
Editorial Model of a Masting Sheer, Model of a mast stand on a ground board representing a bank. The two legs, connected at the top by a heavy crossbar and a hood, lean forward and are held back by two braces and six stays. The legs are on a wall with a semicirc...
- 2020-01-15
- 1
Editorial Model of a 16 cm Gun on a Pivot and Slide on Part of a Gun Deck, Model of a drawn front loader on a turn and slide carriage on part of a ship deck. The brass barrel, 34 cm long and with a caliber of 16 mm, thickened at the tap piece and again behind it...
- 2020-01-15
- 1
Editorial Model of a Pump Windlass, Model of a roasting spindle on a floorboard. The drum, suspended between two cheeks that form the roasting spindle with two servants each, has four 'Brown' cleats on each side. The roasting spindle is operated by two wind tree...
- 2020-01-15
- 1
Editorial Model of a Double Pair or Hydraulic Forge Bellows, Model of a double hydraulic bellows on a floorboard. It consists of two vessels and a drive mechanism that is incomplete. Each vessel has a cylinder inside that connects top and bottom, the space insid...
- 2020-01-15
- 1
Editorial Model of a Figurehead, Model of a figurehead on figurehead, on a floorboard, incomplete. The figure consists of a man's head crowned with a laurel wreath by a harpy above him, the harpy also blows on a trumpet, which is missing smane with the right arm...
- 2020-01-15
- 1
Editorial an elliptical fence on a floorboard. The rudder king is bent and has an octagonal top, so that it can be blocked with a locking plate. Two brackets at the top of the head hold a short stirring pin. The lower rudder pin, which runs below deck, has a sli...
- 2020-01-15
- 2
Editorial Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen on the mirror and gilt carving on the bow. The model has a flat deck, it has a ramsteven, round stern, rudder wit...
- 2020-01-15
- 1
Editorial Model of a ship's galley, Model of a Ship's Galley, Model of a ship galley on a floorboard. It is a low rectangular cupboard with a raised smoke box in the middle over the entire length, on which the chimney stands. The whole is bolted on deck with sma...
- 2019-12-19
- 1
Editorial Model of a Gunlock (Percussion), Model of a percussion lock on a floorboard. The hammer has an elongated hole for the shaft and is mounted between two cheeks that are open to the front. A guide on the hammer causes the hammer to turn first and then be ...
- 2019-12-19
- 1
Editorial Model of an Anchor Release Gear or Brown's Stopper, Model of an anchor trap on a floorboard. The device consists of a slide for the chain, part of which is low so that the flat links of the chain cannot pass through the keep, this low lying part can be...
- 2019-12-19
- 1
Editorial Model of Steering Gear, Model of a steering gear with wheels on a floorboard. The model shows a square stirring head to which a toothed quadrant is attached, with a gear on a shaft, the movement of the steering wheel is transferred to the quadrant. The...
- 2019-12-19
- 1
Editorial Model of a section of an armored turret, Model of a Section of an armored turret, Half model of a hemispherical turret, painted blue, on a floorboard. The outer shell consists of thirteen of the total of twenty-six segments, the inner shell is made up ...
- 2019-12-18
- 1
Editorial Model of a Two-Blade Propeller, Model of an ordinary two-blade propeller in a frame on a floorboard. The blades are flat. The screw can be turned with a crank. The model has a pitch of 210 mm, a diameter of 195 mm, the hub is 40 mm long and has a diame...
- 2019-12-18
- 1
Editorial Model of a Crane for Stepping Masts, Model of a mast crane on a floorboard. It is a wooden construction with a tilted back, the head protruding over the quay. The head is equipped with discs for the hoist, which is missing. Step on the back to climb th...
- 2019-12-18
- 1
Editorial Model of a Crane for Stepping Masts. It is a wooden construction with a tilted back, the head protruding over the quay. The head is equipped with discs for the hoist, which is missing. Step on the back to climb the crane, and a double railing. The two ...
- 2019-12-18
- 1
Editorial Model of a Gun Port of a Floating Battery, Model of a part of the ship's wall with a gun gate, on a floorboard. On the outside, two heavy plates are placed on a row of wheels, over which they can slide back and forth. The plates are provided with a too...
- 2019-12-18
- 1
Editorial Model of a Figurehead, Model of a figurehead on figurehead, on a floorboard. The figure consists of a man's head crowned with a laurel wreath by a harpy above him, the harpy also blows on a trumpet, which is missing smane with the right arm. The skeg a...
- 2019-12-18
- 1
Editorial Model of an Anchor Release Gear or Brown's Stopper, Model of an anchor trap on a floorboard. The device consists of a slide for the chain, part of which is low so that the flat links of the chain cannot pass through the keep, this low-lying part can be...
- 2019-12-18
- 1
Editorial Model of a Masting Sheer, Model of a mast crane, lifting a mast, on a floorboard. The legs lean forward and are held back by two braces and four stays attached to bollards. The foot in which the braces are positioned is adjustable in three positions. B...
- 2019-12-18
- 1
Editorial Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ramsteven, a sharp cruiser fence, a rudder with a rounded blade, two two-leaf ...
- 2019-12-18
- 1
Editorial Model of a Gun and Carriage, Model of a cannon on a gun on a ground board with a gun gate. The wooden barrel, 37.5 cm long and painted black, is of the mantle-type with five mantles that get thinner towards the mouth, the soul is not bored. The grape c...
- 2019-12-18
- 1
Editorial Model of a 20-cm Shell Gun on Slide and Pivot, Model of a 20-inch grenade cannon with rigging on a turning carriage on a floorboard. The barrel, 57.1 cm long and with a caliber of 40 mm, has a refraction ring with a loose cap, a visor with an attachmen...
- 2019-12-18
- 1
Editorial Model of a kiln with a boiler house, Model of a Kiln with boiler room, Polychromed model of a wood stove or steam box on a floorboard. Water is pumped into a reservoir from a pump, from where it is fed to the boiler house. In the house, two boilers wit...
- 2019-12-18
- 1
Editorial Model of a Ship's Stern in Construction on a Shipyard, Construction model of a stern under construction on a shipyard, on a ground board. It is a truss model with sentenced on stacking blocks. Twisted mirror with four throws and eight short back apostl...
- 2019-12-18
- 3
Editorial Model of a Lifeboat Release, Model of a sloop on two nail avits, on a floorboard. The model demonstrates the sloop trap of the sloop, with two hooks releasing the hoists of the davits by releasing a catch in the middle. The sloop is smooth with a flat ...
- 2019-12-18
- 1
Editorial Model of an Ironclad Ram Ship, Polychromed and witnessed block model of a ram tower ship, the floorboard is missing. It has the Rijkswapen in bow and mirror. The model has a ram's stern, crutch fence with balance rudder, steering wheel on the rear of t...
- 2019-12-18
- 1
Editorial Model of a Carriage for a 68-Pounder Gun, Model of a carriage on a floorboard representing a part of a deck with a gun gate. The body becomes narrower towards the front. The cross-over between the cheeks consists of a calf, a crossbar in the middle, th...
- 2019-12-18
- 1
Editorial Model of a Salt-Water Distiller, Model of a distillation apparatus for obtaining drinking water from seawater, placed in the cross section of a ship, on a floorboard. On either side against the ship's wall a condenser is placed above a water box, the c...
- 2019-12-18
- 1
Editorial Model of a Figurehead, Model of a figurehead on figurehead, on a floorboard, incomplete. The figure is a running man in Roman clothing and armor, his right arm raised, in the left a bundle of arrows, the object he is holding in his right hand is missin...
- 2019-12-18
- 1
Editorial Model of a Windlass, Model of a roasting spindle on a floorboard. The drum, suspended between two cheeks that form the roasting spindle with two servants each, only has starboard holes for wind trees: two continuous and four shallow holes. The roasting...
- 2019-12-18
- 1
Editorial Model of the Stern of an 84-Gun Ship of the Line, Model of the stern of a line ship of 84 pieces. Technical model that demonstrates Sir Robert Seppings' cross bond construction on stacking blocks on a floorboard. Around aft ship with seven throws on wh...
- 2019-12-18
- 1
Editorial Model of a Ship Camel, Construction model of a small ship's camel, on a floorboard. The skin has been omitted. The rectangular hull has a flat pram-like bow. The camel has sixteen pumps in two rows, two capstans and two betings, a crane beam at the bow...
- 2019-12-18
- 1
Editorial Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw probably does not belong in this frame, which can...
- 2019-12-18
- 1
Editorial Model of an Apparatus for Testing the Strength of Rope, Model of a device to test the strength of rope, incomplete: the floorboard and various parts are missing. It consists of a frame with a wheel on one side (ratio 12.25 / 1) with a screw end, on the...
- 2019-12-18
- 1
Editorial Model of the Mortar Bed of a Bomb Demolition, Model of the cross-section of a ship, on which the construction of the support of a mortar rack is indicated twice, on a standard on a floorboard. On one side the construction is fully worked out and can be...
- 2019-11-19
- 1
Editorial Model of the Stern of a Steam Battery, Half model of the stern of a stacked steam battery, on a floorboard. The skin of the model has been omitted, the construction can be seen inside and outside. It represents a converted ship of the line: the number ...
- 2019-11-19
- 1
Editorial Model of a Pair of Hydraulic Forge Bellows, Model of a hydraulic bellows on a floorboard. It consists of a barrel that is hung horizontally in two forks and can be turned a quarter circle around its axis by means of a lever. The space inside is transfo...
- 2019-11-19
- 1
Editorial Model of the Sterns of Two Different Frigates, Block model and waterline model of a aft ship, on starboard side according to the frigate IJssel, on port side according to the frigate Waal. One-floor elliptical fence with a starboard side gallery, strai...
- 2019-11-19
- 1
Editorial Model of a Disengaging Gear for Paddle Wheels, Model of the disengagement of the crankshaft of a paddle wheel, on a floorboard. The pin of the crank falls into a hollow bush in the eye of the crank of the wheel shaft, which can be unscrewed and removed...
- 2019-11-19
- 1
Editorial Model of a Dry Dock, Model of the dry dock of Willemsoord, on a ground board. The floorboard shows the composition of the wooden raft on which the dock was built. The dock has an elongated oval shape and a metal ship door with a keel. At the entrance, ...
- 2019-11-19
- 1
Editorial Model of a Wood Kiln, Model of a wood stove or steam box for bending boards, on a ground board. It is a long chest with a door at each end, reinforced with ribs all along the entire length and standing on two longitudinal beams. A round hole in the flo...
- 2019-11-19
- 1
Editorial Model of a Lock Gate, Model of a floodgate on a pile foundation, on a floorboard. The lock door has two doors, each consisting of a few doors that are connected to each other at an angle of ninety degrees. One door closes the lock entrance, the other r...
- 2019-11-19
- 1
Editorial Model of a Four-Blade Propeller, Model of an ordinary four-blade propeller in a frame on a floorboard. The blades are flat. The screw can be turned with a crank. The model has a pitch of 216 mm, a diameter of 173 mm, the hub is 40 mm long and has a dia...
- 2019-11-19
- 1
Editorial Model of an Oscillating Steam Engine, Sketch model of the transmission of the movement of two oscillating cylinders on the shaft, mounted on an upright shelf. The shaft is set in motion with a crank on the rear of the board, so that the pistons and two...
- 2019-11-19
- 1
Editorial Model of a Color Mill, Model of a double paint mill that can be operated by one man on a wooden floorboard. 1:10 scale (according to Obreen)., L. Cramer, Rijkswerf (Hellevoetsluis), 1842, wood (plant material), brass (alloy), model: h 16.2 cm ? w 28.2 ...
- 2019-11-19
- 1
Editorial Model of a Two-Blade Parabolic Propeller, Model of a two-blade parabolic propeller in a frame on a floorboard. The pressure surface of the propeller blades is curved in the form of a parabola. The screw can be turned with a crank. The model has a pitch...
- 2019-11-19
- 2
Editorial Model of a Rudder with a Rapson Slide, Model of the upper part of a rudder with a round stirring king and parts of an elliptical fence, on a floorboard. The rudder king is bent and has an octagonal top, so that it can be blocked with a locking plate. T...
- 2019-11-19
- 1
Editorial Migrants in Mexico Shelter
- 2019-01-27
- 1
Loading